Are Pro Comp Lift Kits Good? Pro Comp Lift Kit Review

Lift kits allow you to go offroad without ruining your suspension. On top of that, nobody’s complaining about the aesthetic of a raised vehicle. Pro Comp sells leveling kits, tire accessories, and all sorts of other automobile parts–their lift kits being some of the most popular products that they sell.


Pro Comp lift kits are good because they offer high-quality parts, easy instructions, and over 200 kits to fit your vehicle. All of their lift kits are backed by an impressive 5-year/60,000-mile powertrain warranty and a transferable warranty on shocks, stabilizers, and more.


Throughout this article, you’ll also learn the following information about Pro Comp lifts kits:


  • Pros and cons of the kit
  • Bonus features from the company
  • Comparisons to similar lift kits
  • Everything included with the Pro Comp lift kit

Perks of Getting a Pro Comp Lift Kit

These kits come with all sorts of extra pieces to customize your own experience. Backed by numerous warranties and guarantees, you can rest assured that the company has confidence in its product.


If you want to know more about the pros of the Pro Comp lift kit, review this list:

It Increases Your Control and Handling

When you have more suspension at your disposal, you’re able to take turns easier on uneven surfaces. Rather than bumping around and dipping down every divot, you can roll right over them without a problem. The Pro Comp lift kit allows you to keep the steering wheel steady when you’re driving.


Even small, sharp turns or driving off a curb can be a challenge in a normal vehicle. Once you add this lift kit, it’ll cruise off without an issue. You’ll feel more in charge of the truck than you ever have in the past.

Ideal for on and Off-Road Use

If you’re interested in off-roading, then you’ll love the Pro Comp lift kit. Due to the suspension and extended brake line, you’ll be able to drive over mud, dirt, sand, snow, and all sorts of other terrains without an issue. Note: You’ll need off-road tires and, preferably, 4WD to have optimal control with a lift kit.


Despite the fact that many people believe that lift kits are only beneficial for off-roading, they’re excellent for paved roads, too. When you’re driving on gravel or asphalt, it’s important that you’re able to move over potholes without damaging the suspension. With a Pro Comp kit, that’s exactly what you’ll be able to do.

Comes in a Wide Range of Kit Sizes

Since there are countless years, makes, and models that make up the automobile industry, it’s essential that you’re able to find a custom kit. Most lift kit companies only offer a small selection, intending them to be a non-existent ‘one-size-fits-all.’ Simply put, every vehicle needs unique modifications for optimal performance.


Pro Comp USA offers over 250 lift kits that accommodate nearly any liftable vehicle in the world. If you want to list your truck or SUV, there’s a high chance that they have the right modifications for you to work with. Every kit is tailored for the specific dimensions and necessities of your vehicle when you place an order.

Includes Optional Extended Brake Lines

If you’re worried about braking properly with a lift kit, then you’re not alone. Many potential owners are worried that their brakes won’t work since the vehicle is lifted, moving it further away from the brake system. The good news is that Pro Comp kits come with optional brake line extenders, as mentioned by AutoAnything.


While you don’t have to use them, it’s always good to have these extensions on-hand. Brake lines that don’t touch correctly end up causing you to slam on the pedal every time you want to slow down. Eventually, the line will wear down and you won’t be able to stop the vehicle without using the emergency parking brake.

Precise Laser-Cut Manufacturing

If you like close attention to detail, then it doesn’t get any better than these kits. They use laser-cutting technology for precise detail on every inch of each piece. You won’t find another lift kit that’s more accurate or well-made in terms of construction.


The biggest issue with hand-made kits is that they’re limited to man-made mistakes. Small scratches and dents are common in these types of kits. Fortunately, since it’s made with a machine and not by hand, a Pro Comp lift kit doesn’t have such issues.

What Are the Downsides of These Kits?

As with any lift kit, the Pro Comp kits have a few potential deal breakers. None of them are terrible, but you should know what you’re getting yourself into before you modify your vehicle. Pro Comp USA has numerous statements and warranties, so any defects will be covered within the designated time frame.


Here’s a list of cons associated with the Pro Comp lift kits:


  1. While they have customized kits for almost every vehicle, some of them can be a bit difficult to find. You’ll have to either compromise and piece together different kits or go elsewhere. The good news is that they have enough for almost every vehicle, so there’s a chance that you’ll be good to go.
  2. They’re high-quality, but they’re not the best kits on the market. When it comes to durability and performance, other brands tend to outshine the Pro Comp USA kits. That being said, none of them are nearly as affordable. It’s a matter of budget and personal preference.
  3. As mentioned by the Wrangler Forum community, the shocks aren’t as good as they might’ve hoped. When you’re getting a lift kit, the shocks are one of the most important parts to consider. The Pro Comp shocks aren’t terrible; they’re just not the best on the market.
  4. Pro Comp USA lift kits don’t have the best reputation. They’re known for being the budget-friendly lift kit that many drivers stay away from until they can get a better kit. That’s not to say they’re not worth the money; Some people just want to spend 2 to 3 times more so they can have better quality.


As you can see, the Pro Comp lift kits aren’t too bad at all. There are a few problems, but nothing should steer you away from the quality of the kit. The occasional bad reputation stems from the fact that they’re not extremely expensive, which drivers often associate with better quality.

What Comes in a Pro Comp Kit?

The Pro Comp lift kit comes with everything you need to get started, including the helpful instruction manual. If you’ve never installed a lift kit, you might want to think about hiring a professional to help you with the process. However, semi-experienced mechanics will be able to cruise right through the installation.


Without further ado, let’s examine everything that you’ll receive when you purchase a lift kit from the company:


  • Bump stops are provided in the kit to prevent the springs from getting too compressed. If you’ve owned a suspension kit, whether it’s to lower or lift the vehicle, then you’ve probably heard of bump stops. Most kits don’t include them since they’re so cheap on the side, but the Pro Comp kit does.
  • As mentioned earlier in the post, brake line extensions are provided to give you the option of attaching them. You don’t have to use them unless the lift is too high for the brake lines to stay in contact with one another. They’re just another small detail that makes these kits worth the investment.
  • Sway bar drop brackets come with the kit to prevent your vehicle from rolling over when you’re going off-road. High inclines and varying terrain can cause instability, but a sway bar will stabilize the vehicle. By using the brackets, you’ll ensure that the bar doesn’t move around while doing its job.
  • A welded cross member is provided to protect the underside of the truck, including the transmission. Since it’s welded, you don’t have to worry about using screws or loosening the cross member as you drive around. It’s robotically-designed for the best precision and durability.
  • You’ll also receive CNC-machined knuckles, strut spacers, driveshaft spacers, skid plates, a lift kit between two to eight inches, shock absorbers, and more, as explained by Pro Comp USA. You won’t be left going to the hardware store for anything other than power tools (if you don’t have them already).

Notable Company Promises

One of the main reasons that drivers choose the Pro Comp lift kit is that they offer multiple promises to back their product. It’s always nice to know that a company has confidence in what they sell, which is why they have a Pro Comp Promise, Lift Shield Warranty, and compliance certification.


Below, you’ll find details on all three company promises.

The Pro Comp Promise

The Pro Comp Promise is quite possibly the best part about buying their products. Owning a lift kit with a long-term warranty is a huge bonus, but this promise lasts for a lifetime. As long as you own the vehicle, you’ll be able to get the parts replaced under manufacturer defects and other common concerns.


It should be noted that the Pro Comp Promise is transferable with the vehicle. Unlike almost any other kit on the market, you can give the lifetime promise and warranty to the next owner of the vehicle. If they decide to sell it, they’ll be able to transfer the warranty repeatedly for the life of the vehicle.

Lift Shield Warranty

As you might’ve already read, the Lift Shield Warranty that comes with all Pro Comp lift kits lasts for up to five years or 60,000 miles. It covers the powertrain, which is something that typically isn’t covered under most other lift kit warranties.


The powertrain warranty is taken a step further by making it completely free. It’s one of the only vehicle modifications that covers the powertrain for such a long time without costing a dime out of your pocket. It covers the engine, transmission, axles, gears, and transfer cases of the vehicle.

Certified Compliant

Pro Comp guarantees that all of their vehicle modifications, including the lift kits, are updated to accommodate modern vehicles. Some lift kits are made for a set of years, whereas the Pro Comp kits are made each year to work with every last detail. If you want to avoid construction and installation errors, this certification should provide peace of mind.


Every vehicle has new modification requirements as recommended by the manufacturer. If they’re not met with upgraded standards, then it could void your manufacturer’s warranty on your vehicle. Since Pro Comp USA fits all new and old requirements, you won’t have to worry about breaking the warranty.

How Long Does the Lift Kit Last?

Like all vehicle mods, lift kits have a standard life expectancy. According to Jeep Forum, most of them last between one to twelve years, depending on the specifications. However, since the Pro Comp lift kit comes with a lifetime warranty, it’s safe to say that it’ll last as long as the vehicle operates. Note that powertrain failures after five years or 60,000 miles could spell the end.

Maintenance Suggestions

  • Never get a lift kit that’s too big for your vehicle. Since Pro Comp has such a wide range of lift kits, you might want to think about what works the best. As stated by Big Texas Tire, anything over four inches could cause massive changes in the way that you handle your vehicle.
  • Wash the parts whenever you clean the vehicle. Mud and debris built-up on the lift kit parts can cause them to corrode or jam. This process causes severe mishandling of the vehicle and eventually ruins the lift kit. By spraying it down and washing the gunk away, you’ll preserve the setup.
  • Use rust inhibitors to prevent rust and corrosion from eating away at the metal components of the lift kit. Even the best lift kits on the market aren’t invincible against the destructive properties of rust. You can choose a spray or paint to protect the outer layer of the lift kit.
  • Park your vehicle on a level surface if possible. When there’s too much pressure leaning toward the front or back of the vehicle, it’ll push the springs out of place. The front or back components will wear quicker than the opposite end, leading to a halved lifespan. Spare yourself the trouble and keep it level.
  • When you’re finished with the installation, get it inspected by a professional. Whether you bring it to a mod shop or a mechanic, it’s smart to have an expert see if you did everything properly. After all, a few misplacements can lead to a damaged lift kit, vehicle, or car accidents down the road.


Maintaining your lift kit will keep it working as it should. Handling can be tough if you’ve never driven a vehicle with a kit, so take it slow and try a one to two-inch lift before going to the highest setting.

What Vehicles Are Compatible?

Now that you’ve seen all of the ups and downs of the Pro Comp lift kits, you might be wondering if there’s a kit for you. The best way to find out is by using the company’s lift kit page and ‘What Fits My Vehicle.’ There, you’ll be directed through a series of options that allow you to choose your vehicle’s specs.


Here’s how the process works in detail:


  1. Navigate to the aforementioned lift kit page, click the fitting button, and wait for the vehicle selection screen to appear. You’ll be able to choose the make, model, year, engine type, and submodel (if it’s applicable). Make sure that you’re choosing the exact answers since every kit is custom made.
  2. Review the price, included parts, and other specs that show up for your vehicle. You’ll be able to get a quote that shows you how much you’ll spend if you want to go through with the process. Remember that the warranty is free, so there are no hidden expenses other than taxes and optional add-ons.
  3. Some vehicles will also ask you to select the drive wheel of the vehicle. In simple terms, this refers to 2WD, 4WD, or AWD. Most vehicles that use lift kits are 4WD or AWD since they’re intended for off-roading. However, there are a handful of kits that will work with any style, so don’t steer away from trying with a 2WD.
  4. Choose what size kit you prefer. Remember that Pro Comp USA offers two to eight inches of lifts, but not all vehicles have the same range. Look through the options once you’ve entered the specifications to figure out what you’ll be offered. Since bigger kits require bigger and more numerous parts, they typically cost more.
  5. If you want to alter the specifications of your vehicle, you can click ‘Remove Vehicle’ or ‘Change Your Vehicle’ at the top of the page under the picture of your vehicle. Note that you shouldn’t try to use parts intended for other trucks, but it’s worth checking to see what’s available at the time.

How Does the Pro Comp Lift Kit Compare to Other Brands?

If you’ve considered the Pro Comp USA kit alongside other brands, you’ve probably noticed dozens of similarities and differences. For example, almost all lift kits (including the Pro Comp USA lift kit) come with different sizes that you can choose from.


Let’s look through comparisons between Pro Comp and other popular brands:


  • BDS offers more accurate lifts because they use cold-wound coils rather than hot-wound coils. As mentioned by 4Wheel Parts, cold-wound coils offer a more precise lift that matches the exact height that you’re looking for. The difference is a matter of millimeters, but it can be a notable difference for some drivers.
  • Pro Comp USA has the only transferable, life-long warranty in the industry currently. This comparison is enough to sway the opinions of countless drivers, so it’s worth considering. If you want peace of mind, then such a good warranty is all you’ll need to choose Pro Comp lift kits.
  • Pro Comp is known for having slightly rougher rides than other types of lift kits. You won’t be bumping around all over the place, but it’s not as smooth as you might prefer when you’re off-roading. The steering wheel stays even, allowing you to maintain optimal handling.
  • Old Pro Comp models don’t have skid plates, which is only an issue if you’re buying a used lift kit. Skid plates prevent damage to the underside of a vehicle. If you’re lowering the vehicle or you’re driving over bumpy terrain, a skid plate can protect your truck and its components.
  • Pro Comp lift kits come with a plethora of spacers that prevent friction damage and smooth out the driving experience. Spacers are included with a lot of other lift kits, but not all of them. If you want to prevent rust, corrosion, and overheating, spacers are the way to go.

Does the Kit Comply With Local Laws?

There aren’t too many laws referring to the modification of vehicles in the United States. That being said, anything that directly endangers the driver or nearby pedestrians as against the law. You shouldn’t perform any DIY mods, including lift kits, without figuring out whether or not it’s legal in your country, state, county, or city.


In short, the Pro Comp lift kit complies with all laws because it’s made to follow updated requirements every year. As mentioned earlier in the article, it’s welded and customized to fit any year, make, or model on the market. Since there aren’t any loopholes or instabilities found in the kits, they’re not a legal risk.


Note: While it’s not a legal issue, Pro Comp USA is required to mention that, according to Proposition 65, some of the parts used in their lift kits are known in the state of California to cause cancer, birth defects, and reproductive harm.


Pro Comp lift kits are some of the most popular mods found on the internet, so you probably have a few questions that need to be answered. Fortunately for you, this section covers everything you want to know and more.


Here are the most common questions and answers about the Pro Comp lift kits:

How Much Does a Pro Comp Lift Kit Cost?

Pro Comp lift kits come in a variety of sizes that accommodate loads of different vehicles. Since they’re so versatile, it’s impossible to have the same price for all of them. However, most Pro Comp lift kits cost between $500.00 to $2,000.00+. All prices are subject to change at any time due to the company’s preferences.

How Do You Install One of These Lift Kits?

One of the many reasons that drivers love the Pro Comp lift kit is that it can be installed at home. You don’t need the help of a professional unless you’ve never worked on a lift kit before. However, clear instructions are included with each Pro Comp kit. Tundra Talk states that it takes between 10 to 12 hours to install their kit.

Can You Remove a Lift Kit if You Don’t Like It?

You can remove any lift kit from a vehicle, including the Pro Comp lift kits. When you’ve removed the kit, it’s essential that you get the vehicle realigned. Failure to do so can cause it to drive improperly, resulting in hazardous accidents. It’s recommended that you get the help of an expert if you ever decide to remove a Pro Comp kit.

What Are the Advantages of Having a Lift Kit?

Lift kits are becoming more common in recent years. They offer three notable benefits:


  1. They’re the best solution for going off-road. Since you’ll be elevated from the ground and controlling a stabilized vehicle, you don’t have to worry about rolling over or breaking the suspension of the truck.
  2. It’s a stylish modification. Whether you live in the city or out on the country roads, lift kits just look good. You’ll have a better visual of everything around you while also enjoying the appearance of being over other drivers.
  3. When they’re installed and maintained properly, lift kits can improve the safety of a vehicle. Car accidents don’t happen as often because other drivers can see you better, but having a crossbar also stops your vehicle from tipping over.


Pro Comp lift kits have a reputation for being budget-friendly, but they’re also high-quality. They come with a variety of parts for your vehicle and customizations that aren’t found in other kits. All in all, they’re a great choice for people who want to lift their vehicle without spending too much money.


Here’s a quick recap of the post:


  • Pro Comp lift kits come with a lifetime warranty on the parts.
  • You’ll also receive a powertrain warranty to protect your vehicle.
  • These kits are custom-tailored to fit almost any vehicle on the market.
  • Everything is made with laser-cut precision for the best results.


  • Pro Comp USA: Lift Kits
  • 4Wheel Parts: BDS vs. ProComp Lift Kits – Which is Better?
  • Auto Anything: Suspension Systems


Recent Posts